A New Single Source Topology Four Quadrant DC-DC SEPIC Converter

Md. Maidul Islam¹, Md. Aman Khan² and Mohammad Ali Choudhury^1,

¹Electrical and Electronic Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh

²Electrical & Electronic Engineering, Pabna University of Science & Technology, Pabna, Bangladesh

Cite this paper

Md. Maidul Islam, Md. Aman Khan and Mohammad Ali Choudhury. A New Single Source Topology Four Quadrant DC-DC SEPIC Converter. American Journal of Electrical and Electronic Engineering. 2016; 4(5):131-138. doi: 10.12691/AJEEE-4-5-2

Abstract

The DC-DC converter find a wide scope in industries, telecommunication sectors, power electronics area, etc. Nowadays bi-directional converters have a higher end over them since the energy from the load during regenerative braking is fed back to the source, thus obtaining energy efficient system. A single topology that can provide Buck-Boost operation with positive output having four quadrant operations is not available in literature. A common limitation of power coupling effect in some known multiple-input dc-dc converters has been addressed in many literatures. In this paper, a new single-input DC-DC four quadrant Sepic converter has been developed to provide four quadrant operation of a high frequency dc-dc converter having one supply source and proper control of the converter. The combined topology has been analyzed and studied by spice simulation and Tecplot.

Keywords

DC-DC converter, PWM, single topology, Sepic, Luo-converter

Copyright

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References

[1]	B.K. Bose, “Energy, Environment, and advances in power electronics”, IEEE Trans. On Power Electronics, vol. 15, no. 4, July 2000.
[2]	B.K. Bose, “Recent advances in power electronics”, IEEE Trans on Power Electronics, vol. 7, no1, 1992.
[3]	B.K. Bose, Ed., “Modern Power Electronics Proc”, IEEE, vol. 80,no.8 August 1992.
[4]	M. H. Rashid, “Power Electronics Circuits, Devices, Applications and Design”, Prentice Hall Englewood Cliffs, 4th Edition, 2004.
[5]	N Mohan, T.M Undeland and W.P Robbins, “Power Electronic Converters, Application and Design”, John Wiley and Sons, New York 1995.
[6]	F.L.Luo, “Double Output Luo Converter An Advantage of Voltage Lift Technique” IEE Proc.. Electric Power Applications 147, pp.469-485, November 2000.
[7]	F.L. Luo, H.Ye and M.H. Rashid, “Two quadrant DC/DC ZVS Quasi-Resonant Luo-converter”, Proceeding of IEE IPEMC 2000 Beijing, China August 2000.
[8]	F.L. Luo, H. Ye and M.H. Rashid, “Four quadrant operation Luo- converters” Proceeding of IEE PESC 2000 Ireland june 2000.
[9]	C.A. Canesin and Barbi, “Novel Zero-Current-Switching PWM converters” IEEE Transactions on Industrial Electronic, vol.44, 372-381,1997.