New Fully-Uncoupled Current-Controlled Sinusoidal Oscillator Employing Grounded Capacitors

D. R. Bhaskar¹, D. Prasad¹, R. Senani^2, , M. K. Jain³, V. K. Singh³ and D. K. Srivastava³

¹Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India

²Division of Electronics and Communication Engineering, Netaji Subhas Institute of Technology, Sector-3, Dwarka, New Delhi, India

³Department of Electronics Engineering, Institute of Engineering and Technology, Lucknow, India

Cite this paper

D. R. Bhaskar, D. Prasad, R. Senani, M. K. Jain, V. K. Singh and D. K. Srivastava. New Fully-Uncoupled Current-Controlled Sinusoidal Oscillator Employing Grounded Capacitors. American Journal of Electrical and Electronic Engineering. 2016; 4(3):81-84. doi: 10.12691/AJEEE-4-3-2

Abstract

A new electronically-controllable fully-uncoupled sinusoidal oscillator, employing four second generation current-controlled conveyors (CCCIIs) and two grounded capacitors, is presented. The oscillation frequency and condition of oscillation are totally uncoupled and electronically adjustable. The circuit has low sensitivities and a high frequency stability factor. SPICE simulation results confirm the validity of the proposed oscillators.

Keywords

sinusoidal oscillator, current mode circuits, current controlled conveyors

Copyright

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References

[1]	Fabre, A., Saaid, O., Wiest F.and Boucheron C., “Current controlled bandpass filter based on translinear conveyors”, Electronics Letters, 31(29), 1727-1728, September 1995.
[2]	Fabre, A., Saaid, O., Wiest F.and BoucheronC., “High frequency applications based on a new current controlled conveyor”, IEEE Trans Circuits Syst, 43(2), 82-91, February1996.
[3]	Kiranon, W., Kesorn, J. and Wardkein, P., “Current controlled oscillator based on translinear conveyors”, Electronics Letters, 32(15), 1330-1331, July 1996.
[4]	Kiranon, W., Kesorn, J., Sangpisit, W. and Kamprasert, N.,“Electronically tunable multifunctional translinear-C filter and oscillator”, Electronics Letters, 33(7), 573-574, March 1997.
[5]	Abuelma’atti M.T. and Tasadduq, N. A., “A novel current controlled oscillator using translinear current conveyors”, Frequenz, 52(5-6), 123-124, 1998.
[6]	Abuelma’atti M.T. and Al-Qahtani, M.A. “A new current controlled multiphase sinusoidal oscillator using two translinear conveyors”, IEEE Trans Circuits Syst–II, 45(7), 881-885, July1998.
[7]	Horng, J.W., “A sinusoidal oscillator using current-controlled current conveyors”, Int. J. Electronics, 88(6), 659-664, 2001.
[8]	Fongsamut,C., Anuntahirunrat, K., Kumwachara K.nd Surakampontorn, W.,“Current-conveyor-based single-element-controlled and current-controlled sinusoidal oscillators”, Int. J. Electronics, 93(7), 467-478, July 2006.
[9]	Maheshwari, S., “Current-mode third-order quadrature oscillator”, IET Circuits Devices Syst, 4(3), 188-195, 2010.
[10]	Bhaskar D. R. and Senani, R., “New CFOA-based single-element-controlled sinusoidal oscillators”, IEEE Trans Instrumentation and Measurement, 55(6), 2014-2021, December 2006.
[11]	Senani, R., Bhaskar D. R. and Singh, A. K., “Current Conveyors: variants, applications and hardware implementations”, Springer International Publishing, Switzerland, 2015, Ch. 8, pp. 395-423.
[12]	Senani, R., Bhaskar D. R. and Singh, A. K., “Sinusoidal Oscillators and Waveform generators using modern electronic circuit building blocks”, Springer International Publishing, Switzerland, Ch. 8, pp. 395-425, 2016.
[13]	Frey, D.R., “Log domain filtering: an approach to current-mode filtering”, IEE Proc. G., Circuits Devices Syst., 140(6), 406-416, December 1993.