New Multiplier/Divider Using a Single Cdba

J. K. Pathak¹, A. K. Singh² and Raj Senani^3,

¹Department of Electronics and Communication Engineering, Echelon Institute of Technology, Faridabad, India

²Departments of Electronics and Communication Engineering, Faculty of Engineering and Technology, HRCT Group of Institutions, Morta, Ghaziabad, India

³Division of Electronics and Communication Engineering, Netaji Subhas Institute of Technology, Sector 3, Dwarka, New Delhi, India

Cite this paper

J. K. Pathak, A. K. Singh and Raj Senani. New Multiplier/Divider Using a Single Cdba. American Journal of Electrical and Electronic Engineering. 2014; 2(3):98-102. doi: 10.12691/AJEEE-2-3-7

Abstract

A new multiplier-divider circuit using a single Current Differencing Buffered Amplifier (CDBA) and only six MOSFETs has been presented. The proposed circuit has the advantage of simultaneously realizing a multiplier and divider without changing the circuit topology. The basic functions of the proposed circuit have been verified through PSPICE simulations using a CMOS CDBA and NMOS transistors with process parameters of 0.35 µm CMOS technology and some application results of the proposed cell in various modes of operation have been included.

Keywords

analog multipliers, Analog Dividers, Current differencing buffered amplifiers, Analog Integrated Circuits, Analog Signal Processing, CMOS Circuits

Copyright

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References

[1]	Acar, C. and Ozoguz, S, “A new versatile building block: Current differencing buffered amplifier suitable for analog signal processing filters,” Microelectronics journal, 30. 157-160.1999.
[2]	Acar, C. and Sedef, H, “Realization of nth order current transfer function using current differencing buffered amplifiers,” International of Electronics, 90(4). 277-283. 2003.
[3]	Tangsrirat, W., Klahan, K., Dunmawipata, T. and Surakampontorn, W., “Low-voltage NMOS-based current differencing buffered amplifier and its application to current-mode ladder filter design,” International Journal of Electronics, 93(11). 777-791.2006.
[4]	D. Biolek, D., Bajer, J., Biolkova, V., Kolka, Z. and Kubrick, M, “Z-copy-controlled Gain-current differencing buffered amplifier and its applications,” International Journal of Circuit Theory and Applications, 39.257-274. 2010.
[5]	Abuelma’atti, M.T. and Al- Qahtani, M.A, “A current- mode current-controlled current-conveyor based analogue multiplier/ divider,” International Journal of Electronics, 85(1). 71-77. 1998.
[6]	Premont, C., Abouchi, N., Grisel, R. and Chante, J, “A BiCMOS current conveyor based four-quadrant analog multiplier,” Analog integrated circuits and signal processing, 19. 159-162. 1999.
[7]	Yuce, E, “Design of simple current-mode multiplier topology using a single CCCII+,” IEEE Transaction on Instrumentation and Measurement, 57(3). 631-637. 2008.
[8]	Kaewdang, K., Fongsamut, C. and Surakampontorn, W, “A wide band current-mode OTA based. Analog multiplier-divider,” Proceedings of the 2003 International Symposium on Circuits and Systems, 1.349-352. 2003.
[9]	Tangsrirat, W., Pukkalanun, T., Mongkolwai, P. and Surakampontorn, W, “Simple current-mode analog multiplier, divider, square-rooter and squarer based on CDTAs,” International Journal of Electronics, 65 (3). 198-203. 2011.
[10]	Khachab, N. I. and Ismail, M, “MOS multiplier/divider cell for analogue VLSI,” Electronics Letters, 25(23), 1550-1551. 1989.
[11]	Khachab, N. I, “A nonlinear CMOS analog cell for VLSI signal and information processing,” IEEE Journal of Solid State Circuits, 26(11). 1689-1699. 1991.
[12]	Ismail, M., Brannen, R., Takagi, S., Fujii, N., Khachab, N. I., Khan, R. and Asserud, O, “Configurable CMOS multiplier/divider circuits for analog VLSI,” Analog Integrated Circuits and Signal Processing, 5.219-234. 1994.
[13]	Pandey, R., Pandey, N., Sriram, B. and Paul, S. K, “Single OTRA based analog multiplier and its applications,” International Scholarly Research Network,” 2012, Article ID 890615, 7, 2012.
[14]	Liu, S. I., and Chen, J. J, “Realization of analogue divider using current feedback amplifier,” IEE Proc. Circuits Devices System, 142(1). 45-48. 1995.
[15]	Keskin, A. U, “A Four quadrant analog multiplier employing single CDBA,” Analog Integrated Circuits and Signal processing, 40. 99-101. 2004.
[16]	Siripruchyanun, M, “A design of analog multiplier and divider using current controlled current differencing buffered amplifiers,” Integrated Circuits, 2007. ISIC '07. International Symposium on Components, Circuits, Devices & Systems, Engineered Materials, Dielectrics and Plasmas, 568-571. Sept. 2007.
[17]	Maheshwari, S. and Khan, I. A, “Current controlled current differencing buffered amplifier: implementation and applications,” Active and Passive Electronic components, 4. 219-227. Dec. 2004.
[18]	Jaikla, W. and Siripruchyanun, M, “Novel current mode four quadrant multiplier/divider based on current controlled CDBAs (CCCDBAs),” The 2006 ECTI International Conference, 509-512. 2006.
[19]	Riewruja, V. and Rerkratn, A, “Four-quadrant analogue multiplier using operational amplifier,” International Journal of Electronics, 98(4). 459-474. 2011.
[20]	Woratraijariya, P., Mano, K., Jaikla, W. and Maneewan, S, “Current-mode 4 quadrant divider employing only single active element,” Electron Devices and Solid State Circuit (EDSSC), 2012 IEEE International Conference, 1-4. 2012.
[21]	Kumngern, M, “A DXCCII-based Four-quadrant multiplier,” Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International Conference, 738-741. 2013.
[22]	Siripruchyanun, M. and Jaikla, W, “A current-mode analog multiplier/divider based on CCCDTA,” AEU - International Journal of Electronics and Communications, 62(3). 223-227. 2008.